Central giant cell granuloma of the jaws-long-term clinical and radiological outcomes of surgical and pharmacological management.

OBJECTIVES: To compare long-term results of different treatment modalities in central giant cell granuloma of the maxillofacial-skeleton. Primary resection may result in major defects. Alternative treatments include pharmacological agents. As yet there has been no consensus on the use of the variety of treatment options, and few studies have reported clarifying long-term results. MATERIALS AND METHODS: This retrospective study on 22 patients with 25 lesions evaluated clinical, radiological and histological features, treatment preformed and lesion recurrence. Success was defined as regression/calcification and failure as recurrence, progression or un-responsiveness. RESULTS: Of the presenting patients, 77% were under age 40. Lesion prevalence was higher in the anterior mandible and left posterior maxilla. Most cases exhibited pain, tooth-mobility or mucosal-expansion. The appearance was predominantly unilocular in the maxilla and multilocular in the mandible, which also exhibited higher prevalence of cortical perforation. Up to 80% of lesions were classified as aggressive. Intralesional steroids/calcitonin were used in 7 cases. Mean follow-up was 39.8 months. Two cases showed recurrence. In 71% of the cases treated pharmacologically, calcification/regression were observed. CONCLUSIONS: Our analysis indicates better outcomes using a combined approach, including both pharmacological and surgical treatments in large aggressive lesions. Pharmacological treatment resulted in decreased size or well-defined lesions, thus reducing the need for extensive bone resection. Dual treatment with corticosteroids and calcitonin showed no superior outcomes, but a larger cohort should be assessed. CLINICAL RELEVANCE: There are several protocols for treatment of central-giant-cell-granuloma lesions, but most are not fully established. It is important to report results that contribute to the establishment of proven protocols. This report attempts to establish the relevance of the combined approach: pharmacological treatment followed by surgical resection.

Real-time Reconstruction of Comminuted Mandibular Fractures Using 3D Printing.

Background: Comminuted fractures of the jaws are complex injuries requiring special attention. In the past, treatment included closed reduction using maxillomandibular fixation. With advancements in technology and fixation systems, open reduction became a prevalent option. These fractures are difficult to reconstruct during the primary treatment phase, thus resulting in higher complication rates. The introduction of three-dimensional (3D) planning and printing brought about superior outcomes, yet these focus on secondary reconstruction due to the need for outsourcing planning and titanium printing. Methods: In this report, we describe real-time in-house 3D planning and printing using computer-assisted design software and a 3D-fused deposition printer for virtual reduction of the comminuted fractures and printing of the reconstructed mandible. Results: Following virtual 3D reduction, the newly created mandibles were 3D printed. The model was then used to preband a reconstruction plate, which in turn was used as a template during surgery for reducing the segments. The process of virtual reduction and printing should take a couple of hours at most. The results of five cases showed good alignment and proper function. Conclusion: Three-dimensional technology can be applied in the everyday primary care treatment protocol of comminuted fractures as an in-house tool which greatly improves both functional and aesthetic outcomes.

Comparison of patient specific implant reconstruction vs conventional titanium mesh reconstruction of orbital fractures using a novel method.

To compare the reconstruction of orbital fractures using patient-specific implants (PSI) and conventional pre-formed titanium mesh; to develop a method of three-dimensional (3D) superimposition and analysis of the reconstructed orbits; and to present the pitfalls in 3D planning of orbital PSI and how to avoid them. This was a retrospective study of patients with orbital fractures who were treated in our institution between the years 2022 and 2023 using PSI or conservative prefabricated titanium mesh. Three different methods for virtual reconstruction of orbital fractures were used and are detailed with advantages, disadvantages and indications. Data acquired included age, gender, method of reconstruction, functional outcomes and aesthetic outcomes. 3D analysis for accuracy of reconstruction was performed. A total of 23 patients were included; 12 were treated using PSI and 11 using prefabricated titanium meshes. There were 8 male and 4 female patients in the PSI group comparted to 5 and 6 in the prefabricated group. All three virtual methods for reconstruction were used successfully, each with the proper indications. When comparing PSI reconstruction to conventional mesh, a significant difference in accuracy was observed; PSI cases showed an inaccuracy of 0.58 mm compared to 1.54 mm with the conventional method. Complications are presented, and tips for avoiding them are detailed. Three different methods for virtual reconstruction were used successfully; automated computerized reconstruction is used for small defects, repositioning is the superior method for non-comminuted cases while mirroring is the method of choice in comminuted fractures. 3D analysis can be performed using a novel method detailed in this report. PSI reconstruction showed superior results, indicating it should be the method of choice when possible. Pitfalls are presented and approaches to prevent them are discussed. Orbital reconstruction is a very important entity in maxillofacial surgery with crucial functional and esthetical implications, and one should use virtual planning and PSI implants, as they significantly improve outcomes.

Evaluation of parental perceptions of lingual and labial frenectomy on their child: a comparison of CO2 laser and conventional scalpel.

To evaluate parental reports of postoperative pain, improvement and satisfaction following frenectomy with scalpel versus carbon dioxide (CO2) laser treatment. Forty-nine patients aged 2-6 years with a short labial or lingual frenulum who required frenectomy were randomly assigned to undergo CO2 laser or scalpel treatment. They were divided into a labial and a lingual frenulum group based on the severity of attachment. Frenectomy was performed using a scalpel or Pixel CO2 10,600 nm laser (Alma Lasers Company, Caesarea, Israel). Postoperative follow-up was conducted via a mobile application where pain was evaluated daily using the visual analog scale (VAS) in the first 72 hours, and painkiller use was recorded. Improvement and satisfaction were evaluated at 1-month post-surgery and compared among the groups. Our results showed significant differences between the degree of clinical attachment of the frenulum, one-month postoperative improvement and satisfaction based on VAS scores (p < 0.001). Although the use of scalpel was associated with lower postoperative pain scores than the CO2 groups, VAS scores of improvement and satisfaction after 1 month were higher in the CO2 groups (p < 0.05). This study showed that although laser was associated with more postoperative pain, it showed greater improvement and higher satisfaction among patients' parents at 1 month post-surgery compared with scalpel.

Regeneration of injured articular cartilage using the recombinant human amelogenin protein.

Aims: Cartilage injuries rarely heal spontaneously and often require surgical intervention, leading to the formation of biomechanically inferior fibrous tissue. This study aimed to evaluate the possible effect of amelogenin on the healing process of a large osteochondral injury (OCI) in a rat model. Methods: A reproducible large OCI was created in the right leg femoral trochlea of 93 rats. The OCIs were treated with 0.1, 0.5, 1.0, 2.5, or 5.0 µg/µl recombinant human amelogenin protein (rHAM+) dissolved in propylene glycol alginate (PGA) carrier, or with PGA carrier alone. The degree of healing was evaluated 12 weeks after treatment by morphometric analysis and histological evaluation. Cell recruitment to the site of injury as well as the origin of the migrating cells were assessed four days after treatment with 0.5 µg/µl rHAM+ using immunohistochemistry and immunofluorescence. Results: A total of 12 weeks after treatment, 0.5 µg/µl rHAM+ brought about significant repair of the subchondral bone and cartilage. Increased expression of proteoglycan and type II collagen and decreased expression of type I collagen were revealed at the surface of the defect, and an elevated level of type X collagen at the newly developed tide mark region. Conversely, the control group showed osteoarthritic alterations. Recruitment of cells expressing the mesenchymal stem cell (MSC) markers CD105 and STRO-1, from adjacent bone marrow toward the OCI, was noted four days after treatment. Conclusion: We found that 0.5 µg/µl rHAM+ induced in vivo healing of injured articular cartilage and subchondral bone in a rat model, preventing the destructive post-traumatic osteoarthritic changes seen in control OCIs, through paracrine recruitment of cells a few days after treatment.

Treatment of Facial Asymmetry Using Distraction Osteogenesis in a Mandible First Approach.

Background: Facial asymmetry includes several etiologies, among them trauma to the condylar area during early childhood and congenital malformations such as hemifacial microsomia. This article describes the management of facial asymmetry in adolescents and young adults using a mandible first approach by distraction osteogenesis, followed by maxillary Le-Fort I as a second stage. Methods: Eighteen patients 14-25 years of age presented with unilateral hypoplasia of the jaws which manifested clinically by deviation of the chin and canting of the occlusal plane. Etiology included hemifacial microsomia and trauma injuries at early childhood.All patients underwent orthodontic treatment and two phases of surgical treatment. Surgical treatment included unilateral mandibular distraction followed by Le-Fort I osteotomy for alignment of the maxilla. Additional bone graft in the affected side and sliding genioplasty were done as required. Results: Marked ramal elongation of 18.94 mm concomitant with mandibular forward traction of 12.5 mm was noted while achieving symmetry. In all cases, the maxilla was centered to the midline in proper occlusion. Post distraction, posteroanterior cephalometric radiographs demonstrated elongation of the affected ramus, improvement in facial symmetry, and correction of the occlusal canting. Relapse was minimal based on long-term follow-ups of 47.4 months. Conclusions: The two-stage surgical approach that includes elongation of the mandible as a first stage followed by adaptation of the maxilla is useful in correcting facial asymmetry. Using this protocol at the correct age (14-18) is very stable, as demonstrated by our results, yet one should always remember the transverse deficiency in the gonial angle requires additional bone grafting or patient specific implants.

Patient-specific Implants for Treating Atrophic Mandibles.

Extremely atrophic mandibles are difficult to treat. Most patients choose to live with removable dentures. However, what if the atrophy is so extreme that spontaneous fractures occur? The objective of this report is to offer a single-stage augmentation method, which uses patient-specific crib-shaped implants (PSI) combined with autogenous free bone grafts. PSI were planned using three-dimensional (3D) segmentation and 3D virtual-planning software. Implants were designed according to the patient's mandible with a mesh-like structure and included large holes for allowing blood supply recovery. During surgery, the PSI fitted perfectly. In cases exhibiting malposition of the mandibular fragments, repositioning was performed using 3D virtual planning. When repositioning mandibular segments, the PSI served as a guide for the correct positioning. Iliac-crest bone graft was harvested and fixed as an onlay over the residual mandibular basal bone. External approach was used to avoid contamination. Six months following surgery, fixation wires were removed, and dental implants were positioned in the newly formed bone. The PSI allowed for rigid fixation, thus leading to optimal incorporation of the iliac-crest bone graft. No further augmentation was required. Bony continuity for future stability and secession of the spontaneous fractures was achieved. Dental implants were placed effortlessly. Treating extremely atrophic mandibles is an entity of its own and is considered one of the most challenging in craniofacial reconstruction. It mostly requires multiple operations with high rates of failure. We offer a novel method of 3D mandibular reconstruction, both vertically and horizontally, showing promising results and achieving enough bone for further dental rehabilitation.

The Relationship Between Morphometric Measurements, Severity, and Success of Zygomatic Arch Fracture Reduction.

PURPOSE: Identify associations between preoperative radiographic measurements and clinical findings of zygomatic arch fractures and postoperative radiographic measurements. Based on those findings, propose a comprehensive treatment algorithm for the solitary zygomatic arch fracture and combined zygomatic arch-zygomatic complex fracture. METHODS: Retrospective cohort study with patients referred to our department for zygomatic arch fractures between 2013 and 2018. Data analyzed included patient demographics, clinical evaluation, and radiographic information. Predictor variables were preoperative morphometric measurements: the initial latero-lateral (LL) defect was determined by the difference between the preoperative LL distances of the fractured and the healthy arches, LL distance was measured from the midsagittal plane in the cranium to the inner cortex of the most displaced arch segment, initial arch coronoid distances were measured from the medial part of the most dislocated arch fragment to the lateral aspect of the coronoid, and the anterior-posterior telescoping was measured as the distance between the 2 points in the arch that lost continuity and overlapped as a result of the fracture. The outcome was defined as the residual defect. It was calculated as the ratio between the postoperative remaining LL distance and the initial LL defect. RESULTS: A total of 179 cases were enrolled, all involving head residual defects. Statistical analysis was performed only on 149 medially displaced fractures. Results show that an initial LL defect larger than 3.5 mm has an 86.3% chance of remaining with a better residual defect (<84.1%), P = .001. Cases with antero-posterior (AP) telescoping > 1.45 mm showed a 72.4% chance of remaining with a poor residual defect >84% (P = .003). Arch-coronoid initial distance showed little effect on the chance of remaining with a large remining defect (P = .417, CI = 95%) CONCLUSION: Based on our results, we found that morphometric measurements can be used to predict the reduction results and can assist the clinician in choosing the optimal reduction method and thus increasing the success rate.

Trends in cleft palate incidence in the era of obstetric sonography and early detection.

BACKGROUND: The effect of improvement in prenatal identification of cleft lip or palate (CL/P) on termination of pregnancy (TOP) worldwide is scarcely reported. Our aim was to assess changes in the prevalence of cleft palate attributed to the high access and availability of prenatal advanced screening and pregnancy termination in Israel. METHODS: A retrospective study was conducted on CL/P patients which were treated in our institute and born between January 2000 and December 2018. Clinical and demographic data were extracted from medical records. Data on TOP were collected based on accessible information from the Ministry of Health. Cleft palate severity was evaluated using the Veau Classification. RESULTS: The study was conducted on 258 patients. Higher incidence of Veau II and III was evident throughout the examined period (2000-2018). However, when evaluating the incidence per year, we found that the incidence of severe cases (Veau III and IV) decreased every year showing a major decline of 60% in the last decade, whereas mild cases (Veau type I and II) demonstrated a marked increase of 90%. Regarding the incidence of abortions in Israel, a decrease of 30% was observed in the last two decades, meanwhile a substantial increase was detected in the rate of abortions related to physical malformations of the fetus. Additionally, the number of late terminations due to physical malformations significantly increased in the last decade. CONCLUSIONS: Significant decrease was observed in the incidence of severe cleft palate cases in the last decade. Concurrently, we found a substantial increase in percentage of abortions performed due to physical malformations. We suggest that these changes might be attributed to the accessibility of advanced prenatal screening and pregnancy termination in Israel under the social healthcare system.

Intraoral and transcutaneous point-of-care-ultrasound: an adjunct bedside tool for oral and maxillofacial clinicians.

Point-of-care-ultrasound (PoCUS) is performed by the clinician at the patient's bedside and is an essential diagnostic tool in many medical subspecialties, in hospital-based care, emergencies, trauma, and in general practice. A simple, novel approach for implementation of PoCUS of the oral cavity and maxillofacial complex is introduced. Relevant indications include differentiating abscess from cellulitis, detecting jaw and facial fractures, assessment of surgical complications, removing foreign bodies, and evaluating soft tissue masses. Intraoral and transcutaneous approaches may be used alone or in combination. This pilot series shows the capability of PoCUS to improve diagnostic accuracy, speed diagnosis, guide procedures, and improve management. Prospective studies are underway to determine the strengths and weaknesses of the method and its impact on patient outcomes.

Is Open Reduction Internal Fixation Using Titanium Plates in the Mandible as Successful as We Think?

ABSTRACT: Titanium plats are the gold-standard for fracture fixation. Titanium is considered biocompatible, corrosion resistant with an elasticity-modulus closest to bone. Nonetheless, titanium plates are not always as inherent as hoped. The authors investigated morbidity associated with titanium plates in mandibular fractures. A retrospective study of mandibular fractures treated between 2000 and 2018 using internal-fixation was conducted. Data included age, gender, complications, and location. Predictor-variable was location. Outcome-variable was plate removal. A total of 571 patients were included, 107 resulted in plate removal (18.7%). Body was the most prevalent location of fracture (29.3%). Symphysis/para-sym-physis showed the highest removal rate (24.1%), followed by body and angle (21.3/19.8%). A total of 23.4% of double-plating cases resulted in plate removal, upper-border in 15% and lower-border in 8.8%, all reconstruction-plates. Exposure was the most frequent complication leading to removal. Although titanium plates are the gold standard, almost every fifth patient returns for plate removal. Age-distribution emphasizing 41 to 50 with decrease towards extremities may imply better healing in the young and soft-tissue elasticity and less complaints in the elderly. Significantly more complications in double-plating compared to lower border suggests proximity to the oral-cavity as a risk-factor for removal. Complication rates and patterns are not negligible and perhaps should encourage clinicians to consider using biodegradable-systems for upper-border plates.

The Relationship Between Morphometric Measurments, Severity and Success of Zygomatic Arch Fracture Reduction.

PURPOSE: Zygomatic arch fractures are commonly treated by closed reduction. This kind of treatment is highly influenced by the treating surgeon and type of fracture. Thus, it is important to choose the optimal treatment for different fractures. Current treatment schemes for zygomatic arch fractures reduction are based on subjective assessments. We believe this approach should be refined. Create a new treatment algorithm for the solitary and combined zygomatic arch fractures based on radiological morphometric measurements. This will assist the clinician in tailoring a suitable treatment for each case and avoiding pitfalls, thus achieving best possible results. METHODS: A total of 179 radiologic images of patients treated in our department for zygomatic arch fractures were morphometrically measured and analyzed. RESULTS: Three variables showed a capacity to predict a large remaining defect; The presence of a preoperative esthetic defect and a large initial latero-lateral (LL) defect reduced the probability of a large remaining defect (OR = 0.289, P= .019; (OR = 0.78, P= .008; respectively). Patients with initial LL defect < 3.5 mm presented postoperative residual defect 3-times greater than patients with initial LL defect > 3.5 mm A large antero-posterior telescoping increased the probability of a large remaining defect (OR = 1.27 P= .003). Cases that had antero-posterior telescoping > 1.45 mm had a 72.4% probability of remaining with a poor residual defect > 84.1% (P= .003). CONCLUSIONS: Based on our results we believe that the use of morphometric measurements is important when assessing zygomatic arch fractures. We found that there are measurements that can be used to predict esthetic and functional defects, as well as probability of resolving them. Morphometric measurements can be used to predict the reduction difficulty and can assist the clinician in choosing the optimal reduction method and thus increasing the success rate.

Diagnostic correlation between clinical protocols and magnetic resonance findings in temporomandibular disorders: A systematic review and meta-analysis.

BACKGROUND: Our aim was to assess the diagnostic correlation between clinical protocols and magnetic resonance (MRI) findings in temporomandibular disorders (TMDs), including disc displacement with and without reduction (DDwR; DDwoR) and arthralgia. METHODS: A systematic review performed in two phases according to the PRISMA checklist. Specific indexing terms were used for search of studies assessing TMDs through clinical diagnostic protocols with the aid of Research Diagnostic Criteria for TMDs or Diagnostic Criteria for TMDs. Quality assessment performed using QUADAS-2. Heterogeneity was assessed using I2 . Publication bias was assessed using funnel plots. For meta-analysis, we used random effect model or fixed effect. The main outcomes were sensitivity and specificity of clinical protocols. RESULTS: Fourteen studies included in the qualitative analysis and 11 studies in the meta-analysis. None of the studies fulfilled all criteria of QUADAS-2. High heterogeneity and high publication bias were found among the studies. Clinical protocols for assessing DDwR compared with MRI showed pooled sensitivity of 66% and specificity of 72%. For DDwoR, sensitivity was 61% and specificity 98%. For arthralgia, sensitivity was 43% and specificity 68% for the presence of effusion. CONCLUSIONS: This review reveals the need for studies with improved quality. Clinical protocols show poor to moderate validity in diagnosis of DDwR and DDwoR compared with MRI. No correlation was found between a clinical diagnosis of arthralgia and MRI effusion. Clinical diagnostic protocols can be used as screening tools, reserving the use of MRI for a more accurate diagnosis in patients with symptoms or dysfunction.

Osteotomy of the Premaxilla in Bilateral Cleft Lip: A Useful Technique Following Failure of Primary Lip Closure.

OBJECTIVES: Successful aesthetic repair of the bilateral cleft lip and palate (BCLP) is one of the most challenging cases encountered by a surgeon. This challenge is heightened when the premaxilla is anteriorly protruded in relation lateral maxillary segments. Our aim is to demonstrate a useful technique for reducing the cleft size before secondary lip repair. We use a premaxillary osteotomy to posteriorly reposition the premaxilla between the lateral segments. METHODS: Six patients with BCLP underwent repositioning of the protruded premaxilla. Five patients had previous primary lip closure procedures with unsatisfactory results. The cleft size was reduced by premaxillary osteotomy from nasal septum and partial removal of the vertical vomer. The osteotomized premaxilla was then repositioned, fixed with a custom-made orthodontic appliance. Following this procedure, the lip was closed in a traditional fashion. RESULTS: All patients demonstrated satisfying lip closure without tension. In each case, the premaxilla was vital and exhibited partial stabilization during follow-up. CONCLUSIONS: In this study the authors demonstrate the usefulness of a premaxillary segment setback as an adjunct to improved function and aesthetics in bilateral lip repair. This method serves as useful technique for previously unsuccessful closure of BCLP.

A life-threatening floor of the mouth hematoma secondary to explantation attempt in the anterior mandible.

Implant dentistry is considered to be a safe and routine surgical procedure. However, cases of life-threatening hematoma of the floor of the mouth resulting in airway obstruction were previously reported as a complication of implant placement in the anterior mandible. Massive bleeding in this anatomical site may be caused by perforating the lingual cortex and/or damaging the lingual perimandibular vessels. In the long term, dental implants can fail, mainly due to peri-implantitis, and must be removed. Explantation procedure may occasionally become a complex challenge, with a risk for various complications.
Case report: This report presents the first case of life-threatening hematoma of the floor of the mouth, as a complication secondary to a failed attempt of dental implant removal at the anterior mandible. The proximity of the implant to the lingual vascular canal might have served as a cause for vascular damage during explantation.
Conclusions: Implant removal complications are scarcely described in the literature. Nonetheless, damaging blood vessels during explantation should not be underestimated. Computed tomography (CT) may be of value not only in preoperative implant planning but also before implant removal in jeopardized anatomical zones such as the anterior mandible. Lingual vascular canals should be looked for on computed tomography scans.

Regeneration of grade 3 ankle sprain, using the recombinant human amelogenin protein (rHAM+ ) in a rat model.

Lateral ligament tears, also known as high-grade ankle sprains, are common, debilitating, and usually heal slowly. Ten to thirty percent of patients continue to suffer from chronic pain and ankle instability even after 3 to 9 months. Previously, we showed that the recombinant human amelogenin (rHAM+ ) induced regeneration of fully transected rat medial collateral ligament, a common proof-of-concept model. Our aim was to evaluate whether rHAM+ can regenerate torn ankle calcaneofibular ligament (CFL), an important component of the lateral ankle stabilizers. Right CFLs of Sabra rats were transected and treated with 0, 0.5, or 1 µg/µL rHAM+ dissolved in propylene glycol alginate (PGA). Results were compared with the normal group, without surgery. Healing was evaluated 12 weeks after treatment by mechanical testing (ratio between the right and left, untransected ligaments of the same rat), and histology including immunohistochemical staining of collagen I and S100. The mechanical properties, structure, and composition of transected ligaments treated with 0.5 µg/µL rHAM+ (experimental) were similar to untransected ligaments. PGA (control) treated ligaments were much weaker, lax, and unorganized compared with untransected ligaments. Treatment with 1 µg/µL rHAM+ was not as efficient as 0.5 µg/µL rHAM+ . Normal arrangement of collagen I fibers and of proprioceptive nerve endings, parallel to the direction of the force, was detected in ligaments treated with 0.5 µg/µL rHAM+ , and scattered arrangement, resembling scar tissue, in control ligaments. In conclusion, we showed that rHAM+ induced significant mechanical and structural regeneration of torn rat CFLs, which might be translated into treatment for grades 2 and 3 ankle sprain injuries.

Surgically Assisted Rapid Palatal Expansion to Correct Maxillary Transverse Deficiency.

BACKGROUND: Transverse maxillomandibular discrepancies are widespread. Treatment is comprised of orthodontic expansion in patients younger than 15 years or by surgically assisted rapid palatal expansion (SARPE) in skeletally mature patients where the possibility of successful orthodontic maxillary expansion decreases as sutures close and resistance to mechanical forces increases. AIM: To present our experience of treating transverse maxillary deficiency using a unique L-shaped osteotomy and to demonstrate stable results. PATIENTS AND METHODS: 32 patients aged between 19 and 54 years exhibiting transverse maxillary deficiency. L-shaped osteotomy was performed laterally from the pterygoid plate posteriorly to above the roots of the second incisive anteriorly continuing with a vertical osteotomy between the lateral incisive and canine teeth toward the horizontal osteotomy. In 18 patients with dysgnathia, bimaxillary surgery was performed one year following the SARPE procedure. RESULTS: Mean transverse maxillary expansion of 6.2mm at the canine incisal and 6.4mm at the first molar occlusal regions were obtained. One year postoperatively results were relatively stable, 5.8mm and 6.2mm respectively. The SARPE procedure resulted in overcoming the maxillary buttress resistance, expansion of the anterior dental arch and bilateral distraction creating bone on both sides of the premaxilla contributing to better alignment of the anterior teeth and superior stability. CONCLUSIONS: We conclude that SARPE is an effective and stable method for addressing severe maxillary transverse discrepancy in adults while the unique osteotomy performed allowed for maintaining proper position of the premaxilla and maxillary midline and allowing for division of the newly created bone bilaterally thus resulting in a more stable outcome.

Extramaxillary Zygomatic Implants: An Alternative Approach for the Reconstruction of the Atrophic Maxilla.

BACKGROUND: Limited bone quality in the posterior maxilla results in low success rates for dental implants. Various bone augmentation methods have been described, yet most require two-step surgical procedures with relatively high rates of resorption and failure. An alternative for these patients is zygomatic implants. Zygomatic implants utilize the basal craniofacial bone. MATERIALS AND METHODS: A retrospective study was conducted on 25 patients exhibiting ridges classified as V-VI according to the Cawood and Howell classification. Seventy-six extramaxillary zygomatic implants were placed. Immediate rehabilitation was performed with a mean follow-up of 18.6 months. RESULTS: Three implants failed, and two were replaced successfully. No significant bone loss was observed in the rest of the implants. Soft tissue around the implant heads healed properly. All implants were prosthetically rehabilitated successfully. CONCLUSIONS: Zygomatic implants allow for immediate loading of an atrophic maxilla. The emergence of the implant is prosthetically correct compared to the intrasinus approach, leading to better dental hygiene and decreased mechanical resistance. 96.1% of the implants survived, with good anchorage and proper soft tissue healing and rehabilitation. We suggest using extramaxillary zygomatic fixture as the first line of treatment in severe atrophic maxilla.

3D Planning and Printing of Patient Specific Implants for Reconstruction of Bony Defects.

We are in the midst of the 3D era in most aspects of life, and especially in medicine. The surgical discipline is one of the major players in the medical field using the constantly developing 3D planning and printing capabilities. Computer-assisted design (CAD) and computer assisted manufacturing (CAM) are used to describe the 3D planning and manufacturing of the product. The planning and manufacturing of 3D surgical guides and reconstruction implants is performed almost exclusively by engineers. As technology advances and software interfaces become more user-friendly, it raises a question regarding the possibility of transferring the planning and manufacturing to the clinician. The reasons for such a shift are clear: the surgeon has the idea of what he wants to design, and he also knows what is feasible and could be used in the operating room. It allows him to be prepared for any scenario/unexpected results during the operation and allows the surgeon to be creative and express his new ideas using the CAD software. The purpose of this method is to provide clinicians with the ability to create their own surgical guides and reconstruction implants. In this manuscript, a detailed protocol will provide a simple method for segmentation using segmentation software and implant planning using a 3D design software. Following the segmentation and stl file production using segmentation software, the clinician could create a simple patient specific reconstruction plate or a more complex plate with a cradle for bone graft positioning. Surgical guides can be created for accurate resection, hole preparation for proper reconstruction plate positioning or for bone graft harvesting and re-contouring. A case of lower jaw reconstruction following plate fracture and nonunion healing of a trauma sustained injury is detailed.